This relatively simple axle kit allows the standard QR type Identiti Rebate fork to work with a 15mmx100mm Thru-axle type front hub.
15x100mm alloy axle installs into most Non-Boost thru-axle front hubs and is tightened using robust 9.5mm (3/8”) diameter Cr-Mo bolts on either end.
Supplied with neat finishing CNC alloy head covers for the bolts.
(Allen key tools not included)
In the event that one of the bolts becomes stubborn and spins the axle instead of releasing the alloy axle features an internal 6mm hex key broach, allowing you to hold the axle with a 2nd Hex (Allen type) key.
- 15x100mm Aluminium Thru-type axle.
- 6mm Hex key internal broach
- 8mm Hex Key Cr-Mo bolts with 9.5x30mm threaded shaft.
- 22mm outer diameter CNC alloy cap.
Safety notice: The 22mm alloy cover will not lock into the Rebate fork’s 22mm safety dropout recess area. This axle must be fitted with standard 21.5mm outer diameter washers that sit inside the lips of the safety dropouts of the forks and prevent accidental release of the wheel.
Do not use this axle without a safety lip or safety washer being in use in event that a bolt loosens.